Utrustningsbeskrivning
Dewatering screw conveyor is usually used to Pulp-making industry to dehydrate the chips. These chips which washed by washer will enter the equipment to dehydrate under the pressure from the screw shaft and the screen mesh. This stage will improve the dryness and these suitable chips will transmit to next stage.

Utrustningsparametrar

Modell

Lhdt -600-200

LHST -600-400

Lhdt -800-300

LHST -800-600

Kapacitet (T/D)

200

400

300

600

Antal spiral (remsa)

Spiraldiameter (mm)

600

800

Spirallängd (mm)

7000

Spiral rotationshastighet (r/min)

60r/min

Motorkraft

11kw

11kw*2

15 kW

15 kW*2

Arbetsprincip

The dewatering screw conveyor utilizes the rotation of a spiral shaft and its inclined design to propel washed material sheets and wash water from the base (equipped with dewatering screen plates) toward the discharge outlet. Dewatered sheets enter the next processing stage, while water and debris are filtered through the screen plates, collecting in a water collection trough at the lower end of the spiral, and then discharged to downstream for bearbetning .

Användningsanvändning

The dewatering screw conveyor is primarily designed for high-efficiency dewatering of material sheets post-washing, effectively reducing the moisture content of the material sheets. The fine impurities, wood dust, contaminants mixed in the water are discharged through the screen plates. Enhances sheet purity and quality. Improves the quality of downstream products by delivering cleaner, torrare matningsstock .

Utrustningsegenskaper

Den har enkel och kompakt struktur, hög dehydreringseffektivitet, stabil och pålitlig drift, hög grad av automatisering, energibesparing och miljöskydd och bekväm rengöring, etc. .

Ansökan

Avvattningsskruvtransportören är huvudsakligen lämplig för massa och papper, träbaserade paneler, biomassa, bambu och träflisbearbetning och andra industrier, vilket stöder chipbrickan eller andra tillfällen som behöver fast-flytande separering .}